...
| Table of Contents | ||
|---|---|---|
|
BAS-IP Intercom system
is a complete IP system: its general infrastructure and devices are compatible with the IP network, avoiding separate non-network gateways use;
is based on Fast Ethernet TCP/IP 10/100 BASE-T following IEEE 802.3 international standard;
is powered by +12 Volts DC or PoE 802.3af;
has an adaptive architecture based on VoIP standards;
has support for configuring outgoing video quality, at least between QVGA, VGA, HD, or FullHD for easy maintenance of network bandwidth (based on H264 ISO / CEI14496-10 or above);
has a built-in mechanism for detecting IP/MAC conflicts in the network;
provides video frame rates of at least 25 FPS;
provides device connection via multicast and unicast;
can connect devices via Peer-2-Peer and SIP without using the main server;
can send messages and make calls to smartphones with Android/iOS via SIP (BAS-IP Intercom app is used for supporting SIP on the phone);
can carry out several simultaneous and independent communication channels over the same network;
transmits audio based on the G.711 codec;
integrates with other subsystems: IP video surveillance, lift control, alarm system, access control system (ACS), home automation systems;
integrates with other BAS-IP products: Link software, Link app, BAS-IP Intercom, BAS-IP UKEY, BAS-IP UKEY Config;
Complies with international standards for internal and external intercom systems:
IEC 62820-1-1:2016 - Building intercom systems - Part 1-1: System requirements - General;
IEC 62820-1-2:2017 - Building intercom systems - Part 1-2: System requirements - Building intercom systems using the internet protocol (IP);
IEC 62820-3-1:2017 - Building intercom systems - Part 3-1: Application guidelines - General;
use a wall or flush mounting for fastening;
...