In this menu, the basic network settings and the log display are set.
...
Network settings
DHCP: Enable Enable/disable the mode of receiving network settings automatically.
IP: Device IP Device IP address.
| Info |
|---|
By default, the SP-02 can have a DHCP mode enabled. |
Subnet mask: Subnet Subnet mask.
Default gateway: Default gateway address.
Primary DNS Server: The primary DNS server address.
Secondary DNS server: The The address of the secondary DNS server.
Protocol: The The network protocol used (IPv4 or IPv6).
| Info |
|---|
Option is enabled if DHCP is disabled. |
Log display settings
Enable Print: Enable Enable/disable logging mode.
Log level: Select Select the preferred logging level, where 0 is the minimum level, 7 is the most detailed log.
Enable low-level logging: Enable Enable/disable low-level logging to display it further.
Output to: Select Select the preferred output of log files (console, local file, syslog, and local file).
Syslog Server IP: The The IP address of the log collection server.
Local file: The The path to the location of the local file