This tab contains a log that displays all the events that happened with the panel: login to the web interface, lock opening using an identifier, to or from which number a call was made, etc. Log is cleared every 182 days.
List of all events displayed in the log:
Priority | Category | Event |
|---|---|---|
Low | Information | Device Booted |
System | SIP registration lost | |
Medium | Access | Door was opened |
Access | Door was closed | |
Access | Lock opened by free access button | |
Access | Lock opened by exit button | |
Access | Lock opened by identifier | |
Access | General access code entered | |
Access | Lock opened by face identifier | |
Access | The lock is open on alarm | |
Access | Door sensor opened | |
Access | Door sensor closed | |
System | Login to the web interface | |
System | Failed login attempt to the GUI settings | |
System | Entered to GUI settings | |
Information | Incoming call | |
Information | Outgoing call | |
Information | Outgoing call from web | |
Information | Missed outgoing call | |
High | Access | Access denied by remote server |
Access | Access granted by remote server | |
Access | Wrong input code | |
Access | Unknown identifier | |
Access | Not valid face identifier | |
Access | Unknown QR code | |
Access | Access granted by the web interface | |
Access | Access denied by the web interface | |
Access | Lock opened by response device | |
Access | Not valid identifier | |
Emergency | Tamper triggered | |
System | Failed login attempt to the web interface | |
Critical | Access | Door is not closed too long |
You can sort events by date from most recent to oldest and vice versa. To do this, click the Date/Time column.
...
Also, there is a filter by date and parameters, with the help of which you can configure a flexible data display and quick search. To do this, you need to click the Filters button and set the necessary parameters:
in the Column line, select the search parameter:
priority: display of events with selected low/critical/medium/high priority;
category: display of events with the selected category (emergency, access, system, information);
name: display of events from previous tables by their names;
choose search condition:
more (available for priority parameter): display of events that are higher in priority than selected. So, if you select more than low, then you will see events with critical/medium/high priority;
less (available for priority parameter): display of events that are lower in priority than selected. So, if you select less than medium, then you will see events with low priority;
equal (available for all parameters): display of events by a selected parameter. So, if you select events equal to low priority, you will see all Device Booted and SIP registration lost events;
choose Value depending on the selected column.