After AAfter verifying whether a device is complete, you can switch to the connection step.
For connection you will need:
...
- An
an Ethernet UTP CAT5 or higher cable connected to a network switch/router;
...
...
The maximum length of the UTP CAT5 cable segment should not exceed 100 meters, according to the IEEE 802.3 standard.
power supply at + 12V, 2
ampsAmps;
wires must be brought for connecting the lock and additional modules (optional).
| Aura panel | |
|---|---|
| tab | 1 |
| styles | {"body":{"text":{"color":"#02070e","textAlign":"left","fontWeight":"lighter","fontSize":14}},"header":{"backgroundColor":{"color":"#ffffff"}},"headline":{"alignment":{"horizontal":"start"}},"base":{"border":{"bottom":false,"left":true,"right":false,"top":false,"color":"#ffab0096","width":10,"style":"solid"},"backgroundColor":{"color":"#ffffff"},"borderRadius":{"radius":4},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)","x":0,"y":1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}} | body |
| Info | |
You can connect any type of electromechanical or electromagnetic lock for which the switched current does not exceed 5 Amps. |
The following are typical connection schemes of all elements to the entrance panel:
| Table of Contents |
|---|
Connection using an external power supply and an electromagnetic lock
...
Connection using an external power supply and an electromechanical lock
...