...
| Info |
|---|
To find the Integration Device IP address, open a Windows command prompt and type "arp -a". This command will show you the connected IP addresses along with their MAC addresses. You can then locate the MAC address of the Integration Device from the list. The username and password are the Integration Devices administration credentials. |
After creating an integration profile, navigate to the reader screen Configuration > Readers and assign the integration profile to the selected reader, then press Save.
Go to Access > Access Groups and add the reader to an access group. You must set a “Time Schedule” for the reader. Then press Save.
After the programming is complete, you can test the integration profile by following the steps below.
In CA4K, go to Personnel to create a new badge
Enter a First/Last Name and Badge Number
Set an Activation Date Time and an Expiration Date Time. (If you leave both fields blank, the badge is activated immediately and expires in 20 years)
Click on the Access Group tab and assign the access group to the user
Press Save
After the new badge has been saved, login to your Bas-IP web portal
Go to Access management > Identifiers tab, where you should see your newly created badge information. Under Access Management > Access Restrictions you will see the Activation and Expiration Times for your Badge.
