Integration with Napco works with the AV-08FB Android-based panel. By connecting the panel to Card Access Software v1.2.x, users can manage credentials through a single interface, eliminating the need for a separate web interface, which simplifies the process. The integration covers access control, video surveillance, and real-time monitoring, making the system flexible and convenient, especially for residential complexes and offices where quick management and rapid response to events are crucial.
Enable Device Integration in System Settings in Card Access Software v1.2.x
To enable device integration, go to the System Settings > System-wide Settings > General tab, and enable the 'Enable Device Integration' option. Then press Save. (You must do a full download to all your panels/locks after enabling)
Once enabled, under 'Configuration' you will see a new menu called 'Integration Devices' and also an 'Integration Profile' drop down on the general tab under the Configuration > Reader’s screen.
“New Integration Profile Shown Under Reader Screen”
Integration (BAS-IP) Configuration
Under Configuration > Integration Devices, Press New and Enter a Device Name.
Select Intercom as the Integration Device Type and -IP Intercom as the Integration Device
Enter the Device IP Address along with the username and password for that device
Select the device Time Zone (This is the Time Zone of your BAS-IP Device)
Press Save when complete
| Info |
|---|
To find the Integration Device IP address, open a Windows command prompt and type |
After creating an integration profile, navigate to the reader screen Configuration > Readers and assign the integration profile to the selected reader, then press Save.
Go to Access > Access Groups and add the reader to an access group. You must set a “Time Schedule” for the reader. Then press Save.
After the programming is complete, you can test the integration profile by following the steps below.
In CA4K, go to Personnel to create a new badge
Enter a First/Last Name and Badge Number
Set an Activation Date Time and an Expiration Date Time. (If you leave both fields blank, the badge is activated immediately and expires in 20 years)
Click on the Access Group tab and assign the access group to the user
Press Save
After the new badge has been saved, login to your BAS-IP web portal
Go to Access management > Identifiers tab, where you should see your newly created badge information. Under Access Management > Access Restrictions you will see the Activation and Expiration Times for your Badge.
