An indoor video phone (monitor) home screen consists of the main desktop and 2 additional (by default). In addition, you can add an unlimited number of custom desktops and flexibly configure them (set the number of application icons and their layout). Up to 8 application icons can be placed on each desktop.
| Table of Contents |
|---|
The first desktop displays the current date and time.
The second (main) desktop displays:
the date;
the time;
the weather widget;
the main sections of the monitor menu: Calls, Messages, Entrance panel monitoring menu, IP camera viewing menu.
...
...
| Panel |
|---|
...
| ||||||||
You can set the Contacts widget to be displayed on the main screen. |
Instead of Calls, Messages, Entrance panel monitoring, and IP camera viewing menus, all numbers added to the Contacts will be shown. So, you can quickly call the required contact. To set the Contacts widget:
|
...
|
...
|
...
|
...
|
...
To turn off the widget display, enable the feature in the Custom widget section. |
The third desktop displays additional system menus and applications:
security menu;
service menu.
...
How to change an application on the main desktop
You can change the main sections of the monitor menu (calls, messages, entrance panel monitoring menu, IP camera viewing menu) into any other app. To do this you must:
Press the app icon to be replaced and hold for a few seconds.
Select the desired application in the opened tab.
Press the new icon and hold for a few seconds to return the default app.
How to add new desktop and apps to it
Go to an additional desktop.
Press any icon and hold for a few seconds to open editing mode.
Press the plus button in the low left corner to add a new desktop.
Select the required number displayed on this desktop icons: 2x2/3x2/4x2.
Press the plus icon and select the necessary apps one by one in the new window.
After adding the necessary apps, click the Ok button.
How to delete desktop
Go to the editing mode by pressing any icon on an additional desktop.
Press the Delete button in the low left corner.
Click the Ok button to save.
Navigation bar
The navigation bar is used for quick access to some features. To open the bar, you need to swipe down at the top of the screen or press any empty space.
...
In the bar, you have access to the following features:
concierge quick call to specified number of concierge, another monitor, or SIP number of any other device. You can enable the feature in the monitor settings or via the web interface;
сall an elevator menu (EVRC IP controller is required for functioning);
sound modes configuration. You can enable/disable Normal, Mute, or Do not disturb modes (also can be configured in the monitor settings and the web interface):
...
normal mode is a default mode when all sounds are turned on;
mute mode is a mode when all sounds (except the alarm) are turned off, but incoming calls are displayed on the screen. It is possible to set an automatic disabling timer (from 1 to 24 hours);
do not disturb mode is a mode when all sounds (except the alarm) are turned off, and incoming calls are not displayed on the screen;
monitor settings;
system settings (access is possible only after entering the admin password).