With this section, you can set sensors that will be triggered in a
...
corresponding scene. You can find the connection scheme of the sensors on
...
the Electrical connection page.
There are 3 available scenes (Out, Home, Sleep) for various occasions. To configure their operation, select which sensors should be enabled/disabled for each scene.
| Info |
|---|
The scene setting is only available on the main monitor (with 0 device number). |
Activation time (from 0 to 300 sec) is the time after which the monitor will switch to security mode and activate the necessary scene.
...
When a sensor is triggered, an alarm signal will be sent to the main and all synchronized monitors.
...
The scene setting is only available on the main monitor (with 0 device number).
...
...
| Tip |
|---|
To disable the alarm, enter the administrator password. The default password is 123456. |