You can use this menu to set the parameters for the lock opening, door sensor input, elevator module, etc.
...
Aura panel | ||||||
---|---|---|---|---|---|---|
| ||||||
If an electromechanical lock is used, it is recommended to select one impulse. If an electromagnetic lock is installed, we recommend setting multiple pulses for the lock correct and long functioning. These settings will help the locks work correctly and for a long time, especially mechanical as it might break if the voltage is applied to it for too long. |
- Keep the lock open or not if SIP registration is lost. It is necessary to set no SIP registration time for this parameter.
Open lock
...
In this section, you can remotely open lock #1 or lock #2 (when using SH-42) by clicking the corresponding button.
Additional settings
...
- set the Floor number for further features that work only with the elevator control module EVRC-IP;
- enable/disable features of sending the elevator to the indicated floor number when the lock is open from the monitor.
Door sensor input
...
Also, you can check and update the current door sensor input status (open/closed).