Versions Compared

Old Version 2

changes.mady.by.user BAS-IP

Saved on

compared with

New Version 3

changes.mady.by.user BAS-IP

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

In this section, you have access to the following data: 

  • device serial number;
  • reader current firmware version;
  • installer code to access device settings (by default it is 123456 or 000000). 




Aura panel
tab1
styles{"header":{"backgroundColor":{"color":"#ebb5d1cf"},"icon":{"size":18,"name":"faExclamation","color":"#000"}},"headline":{"text":{"fontSize":14,"fontWeight":"bold","color":"#000","textAlign":"left","text":"Warning"}},"base":{"size":{"width":400,"height":150},"backgroundColor":{"color":"#fdcde5b8"},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.2)","x":0,"y":1,"blur":6,"spread":0},{"color":"rgba(0, 0, 0, 0.4)","x":0,"y":12,"blur":4,"spread":-10}]}},"body":{"text":{"color":"rgba(0, 0, 0, 0.75)","fontSize":14,"fontWeight":"normal","textAlign":"left"}}}
body

If the installer code is lost, contact BAS-IP technical support (support@bas-ip.com) to restore it:

  1. Power down a panel.
  2. Short the green and white wires (on the panel backside) that come from the reader.
  3. Power up the panel.
  4. Open the UKEY config app and connect to the reader without the installer code. 
  5. Go to the device settings and enter new installer code. 
  6. Save and apply new settings. 
  7. Power down the panel.
  8. Open the green and white wires.