...
| Table of Contents | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Preparation of Axxxon One Software Suite
First, Axxxon One software package must be installed and configured:
...
After the software suite is activated, you need to connect the suite to the server:
...
IP Device Discovery Wizard
After the software suite setup is completed, you need to add the camera device using the device discovery wizard.
...
Automatic search for IP devices.
Manual input of device data.
Adding devices to the configuration.
Bulk adding devices using .CSV files (see Bulk creation of IP devices).
Automatic search for IP devices
To start searching for devices, click the Search button. While searching, a progress bar will be displayed.
...
In addition, you can filter cameras from a subnet.
...
Manual input of device data
If an IP device is not shown in the search results (because it is located on a different subnet or the connection with it is temporarily lost), you can add it manually. To do this, you need to select the type of device to be added, specify the IP address and connection port of the device, and select the vendor and model in the area with a neutral background located under the list with automatic search results.
...
If the device's IP address, Port, Vendor, Username and Password are set, the device Model can be automatically detected by clicking the Search button next to the Model window:
...
Adding devices to the configuration
You can add the devices in bulk, using one of three modes are available:
...
You can also add a single device using the Plus button located on the right to the device number.
Configuring Web Server
The web server allows remote access to the Axxxon One suite over the internet.
...
| Info |
|---|
|
Configuring License Plate Recognition
After the cameras and servers are set, you need to Ńonfigure the license plate detection tools.
...
By default, the detection tool is enabled and set to recognize vehicle license plates. If necessary, you can change the detection tool parameters. The detailed information on the parameters is found here.
Configuring Macros
Macro is a tool used to configure system responses to certain events. System response may include one or several different actions.
...
Configuring macros when working with vehicles lists
Integration with Link Server
After you have set up all the components of Axxxon One within their suite, you can set up the integration within the Link app.
In the Licenses tab, ensure that you integrate with the Axxon One server and its cameras in your license. In addition, this option is enabled for the server.
Go to the General tab > the Integration section.
Click the plus icon in the low left corner to add the integration with the Axxon One server. You can add as many integrations as you need.
Enter the following information for the integration:
...
As a result, a camera and server can interact with license plates.
Using license plates for guest access
You can use a license plate number as a guest identifier automating the process of entry for guest vehicles.
...