| Widget Connector | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
To configure a monitor remotely through the web interface, you must connect to the device via an internet browser on a PC. The monitor and PC from which you plan to access the device must be connected to the same network segment.
In the Internet browser, you must enter the monitor IP address into the address input line. To find the device and figure out its IP address you can use this search and upgrade tool (that shows all connected to the network devices) or check the monitor settings (if the network data has already been entered while configuring).
After entering an IP address in the browser, a window to type a login and password will appear. At the top right corner, you can change the interface language. English, Ukrainian, Spanish,
...
Polish, Dutch, French, and Russian languages are available.
Also, you can find a device model name
...
in the lower left
...
corner and the current firmware version at the lower right
...
corner.
...
| Tip |
|---|
Default values to enter the web interface: Login: admin Password: 123456 The password for logging into the web interface is the administrator password. By default, it is 123456, but you can change it in the appropriate tab. |
...