Page Comparison

General features:

• User desktop creation/deletion;

• Third-party applications installation;

• Flexible desktop configuration: adjusting the number of icons on the desktop (2х2/3х2/4х2); adding/deleting app icons;

• Availability of navigation bar for quick access to some system functions;

• 3 sound modes:

  • Normal - all sounds are turned on.

  • Mute - all sounds except alarm are muted, but incoming calls are displayed on the screen.

  • Do not disturb - all sounds except alarm are muted and incoming calls are not displayed on the screen.  

• Missed call quantity displaying on the main screen; 

• Date and time displaying on the main screen;

• Automatic synchronization of date and time with data with NTP server;

• Weather displaying on the screen;

• Automatic weather detection by IP address (if you have Internet access) or entered location;

• Availability of built-in browser for quick access to user links;

• Ability to manage two locks (with SH-42 module);

• Ad demonstration during standby mode;

• 3 variations for screensaver during standby mode: clock, photo frame, IP camera (1-cam, Tour, Quad splitter);

• User photos displaying during standby mode (photo frame feature); 

• Ability to use widgets of third-party apps;

• Notifications about new software updates;

• Fast and regular software updates from BAS-IP server;

• Ability to update the software manually, from a SD card, or via the web interface;

• Ability to update software from a custom server;

• Backup of photos taken during a call to SD card and its further watching at the monitor;

• Ability to export system logs;

• Availability of open API; 

• WiFi support; 

Communication:

• Two-way audio communication with echo cancellation between devices;

• One-way video communication while a call from panel to monitor or vice versa;

• Making calls to other monitors, entrance panels, or personal devices via multicast, P2P, SIP;

• Making calls to concierge or assigned number via SIP or P2P;

• Making calls to one concierge or some concierges located in the same network;

• Forwarding calls from the monitor to other devices (up to 4); 

• Watching video from the panel before answering a call;

• Declining an incoming call without answering;

• Answering an incoming call/ending a conversation;

• Ability of automatic reception of all incoming calls or calls from concrete contact;

• Availability of answerphone (If there is no answer within 30 seconds, the monitor will start recording a video and audio message from the visitor); 

• Photo and video recording during a conversation;

• Automatic call recording;

• Lock opening during a conversation;

• Ability of the automatic end of a call after opening a lock; 

• Availability of call history with detailed information about the date, caller, and call duration;

• Partial or complete deletion of records from the call history;

• Adding up to 10 000 contacts with inner or SIP numbers of an entrance panel, concierge, or any other device;

• Ability to mark a contact as a favorite, and it will be displayed at the beginning of the list;

• Ability to add contacts to a black list;

• Ability to import/export contact list;

• Watching videos from entrance panels at the Monitoring menu; 

• Ability to mark an entrance panel as default, so this panel will be displayed as first while opening the Monitoring menu;

• Receiving newsletters or surveys from the concierge or management organization;

• Sending additional notifications or making calls to one or some SIP numbers if the alarm sensor is triggered;

• Sending notifications to the SIP number about each sensor state; 

Security:

• Ability to connect 4, 8 (depends on device model) or 16 sensors (with additional SH-16 module) to the monitor;

• Ability to connect a siren or light bulb to the alarm loop (It will be active if the alarm sensors are triggered);     

• The setting of sensor working type (Normal, Emergency, 24 hours), mode (Trigger, NO, NC, Bell), the delay time before the sensor is triggered, a name for each sensor;   

• User-configurable 3 security scenes (Out, Home, Sleep) and delay time before a scene activation;

• Ability to add RTSP streams (up to 32) for IP cameras video displaying at а monitor during a call or at a special menu;

• Ability to choose IP camera as default and it will be displayed the first when opening a special menu for watching;

• Video recording from the desired IP camera (up to 4) when the motion sensor is triggered;

• 3 configurable variations of selected IP cameras display during standby: single, quad splitter (simultaneous 4 cameras display at one screen), tour (one by one cameras display);

• Protection of unauthorized door opening from the monitor by entering a password; 

Settings:

• Ability to connect a doorbell to the monitor;

• Screen brightness adjustment;

• The volume of the incoming call adjustment; 

• Ability to turn on/off the camera (depends on model); 

• Volume adjustment and turning on/off the microphone while conversation;

• Ability to change DTMF symbols by pressing which the lock will open;

• Ability to get network settings automatically (DHCP)/set manually; 

• Ability to change user and admin passwords;

• Ability to customize the ringtone for incoming calls;

• Ability to change and set custom wallpaper on your desktop;

• Adjustment of standby mode time activation;

• Home automation services setting;

• Setting the units of measure for the weather widget;

• Ability to access system settings (for admin only);

• Setting the operating time of Mute and Do not disturb modes for automatic activation;

• Ability to use custom NTP server for date and time synchronization;

• Ability to set date and time manually;

• Ability to change the logo displayed on a monitor screen;

• Ability to set the interval for notifications about each sensor state;

• Ability to backup device settings;

• Ability to restore devise settings from uploaded backup; 

Integration with Intercom application:

• Video calls from a monitor to a mobile device or vice versa;  

• Ability to take photos on a mobile device during a call;  

• Forwarding calls from the monitor to the mobile device; 

• Making calls to the assigned concierge number from a mobile device;

• Ability to add IP cameras to the app using Onif or RTSP;

• Ability to watch video from added IP cameras;

• Ability to add contacts for quick calls; 

Integration with Link software:

• Ability to control and manage all monitors at one or several residential areas/offices;

• Device status control (monitor will send its activity status to the server);

• Device management: monitor search in a system, adding to a residential area/office group, remote pre-configuration, remote update, and settings backup;

• Ability to send newsletters or surveys to a selected group of monitors, configure time and rules of sending; 

• Ability to configure forwarding of calls from monitor to other devices;

• Availability of a list with information about calls done from the monitor (virtual numbers, call duration, and statuses); 

Integration with Link application:

• Connection with monitors of a building that were previously added to the Link server; 

• Ability to make audio/video calls to all added to Link devices;

• Availability of all incoming/outcoming calls history with photos taken during a conversation of more than 3 seconds;

General features:

• 2 sound modes:

  • Normal - all sounds are turned on.

  • Do not disturb -  all sounds except alarm are muted and incoming calls are not displayed on the screen.  

• Missed call quantity displaying on the main screen; 

• Date and time displaying on the main screen;

• Automatic synchronization of date and time with NTP server;

• Ability to manage two locks (with SH-42 module);

• Fast and regular software updates from BAS-IP server;

• Ability to update the software manually via the web interface;

• Ability to update software from a custom server;

• Availability of open API; 

Communication:

• Two-way audio communication with echo cancellation between devices;

• One-way video communication while a call from panel to monitor or vice versa;

• Making calls to other monitors, entrance panels, or personal devices via multicast, P2P, SIP;

• Making calls to assigned concierge number via SIP or P2P;

• Making calls to some concierges located in the same network;

• Forwarding calls from the monitor to other devices (up to 4); 

• Receiving video from the panel before answering a call;

• Declining an incoming call without answering;

• Automatic reception of all incoming calls;

• Answering an incoming call/ending a conversation;

• Lock opening while incoming call or conversation;

• Ability of the automatic end of a call after opening a lock; 

• Availability of call history with detailed information about the date, caller, and call duration;

• Partial or complete deletion of records from the call history;

• Adding via the web interface up to 300 contacts with inner or SIP numbers of an entrance panel, concierge, or any other device;

• Ability to import and export contact list;

• Ability to turn on/off automatic reception of all incoming calls for concrete contact;

• Ability to add concrete contact to the ban list;

• Ability to mark a contact as a favorite, and it will be displayed at the beginning of the list;

• Watching videos from entrance panels; 

• Ability to mark an entrance panel as default, so this panel will be displayed as first while opening the Panels menu;

• Receiving newsletters from the concierge or management organization (messages are sent with the help of Link software);

• Sending information to the server with Link software about device state; 

Security:

• Ability to connect 4, 8 (depends on device model) or 16 sensors (with additional SH-16 module) to the monitor;

• Ability to connect siren or light bulb to the alarm loop, so it will be active if the alarm sensors are triggered;     

• The setting of sensor working type (Normal, Emergency, 24 hours), mode (Trigger, NO, NC, Bell, SOS Call), the delay time before the sensor is triggered, a name for each sensor;   

• User-configurable 3 security scenes (Out, Home, Sleep) and delay time before a scene activation;

• Ability to add RTSP streams (up to 10) for IP cameras video displaying at а monitor during a call or at a special menu;

• 2 configurable variations of selected IP cameras display during standby: IP Cam single or IP Cam tour (one by one cameras display);

• Making SOS calls to indicated numbers or concierge (up to 8) via SIP or P2P;

• Taking a photo of a caller in some seconds after answer; 

Settings:

• Ability to connect a doorbell to the monitor;

• The volume of the incoming call adjustment; 

• Adjustment of speaker volume during a conversation;

• Turning on/off the microphone while conversation;

• Ability to change DTMF symbols by pressing which the lock will open;

• Automatic receipt of network settings (DHCP) feature; 

• Ability to change admin and administrator passwords;

• Ability to access system settings (for administrators only);

• Setting the operating time of Do not disturb mode for automatic activation;

• Ability to use custom NTP server for date and time synchronization;

• Ability to set date and time manually;

• Ability to reset a device to default settings;

• Ability to restore devise settings from uploaded backup; 

Integration with Intercom application:

• Video calls from a monitor to a mobile device or vice versa;  

• Ability to take photos on a mobile device during a call;  

• Forwarding calls from the monitor to the mobile device; 

• Making calls to the assigned concierge number from a mobile device;

• Ability to add IP cameras to the app using Onif or RTSP;

• Ability to watch video from added IP cameras;

• Ability to add contacts for quick calls; 

Integration with Link software:

• Ability to control and manage all monitors at one or several residential areas/offices;

• Device status control (monitor will send its activity status to the server);

• Device management: monitor search in a system, adding to a residential area/office group, remote pre-configuration, remote update, and settings backup;

• Ability to send newsletters or surveys to a selected group of monitors, configure time and rules of sending; 

• Ability to configure forwarding of calls from monitor to other devices;

• Availability of a list with information about calls done from the monitor (virtual numbers, call duration, and statuses); 

Integration with Link application:

• Connection with monitors of a building that were previously added to the Link server; 

• Ability to make audio/video calls to all added to Link devices;

• Availability of all incoming/outcoming calls history with photos taken during a conversation more than 3 seconds;

General features: 

• The indicator changes color depending on the mode and functions;

• 2  sound modes:

  • Normal - all sounds are turned on.

  • Mute - all sounds and incoming calls except the alarm are muted, indicator continues to work.

• Ability to update software from an SD card or via the web interface;

• Ability to update software from a custom server;

• Availability of open API;

Communication:

• Two-way audio communication with echo cancellation between devices;

• Making calls to one or some assigned number via SIP or P2P by pressing buttons;

• Making calls to one concierge or some concierges located in the same network;

• Forwarding calls from the monitor to other devices (up to 4); 

• Answering an incoming call/ending a conversation;

• Declining a call without answering it;

• Lock opening while incoming call or conversation;

• Ability of the automatic end of a call after opening a lock;

• Sending messages to the server with Link software about device state;

Security: 

• Ability to connect 4 or 16 sensors (with an additional SH-16 module) to the monitor;

• Ability to connect siren or light bulb to the alarm loop, so it will be active if the alarm sensors are triggered;   

• The setting of sensor working type (Normal, Emergency, 24 hours), mode (Trigger, NO, NC, Bell, Call), the delay time before the sensor is triggered, a name for each sensor;   

• User-configurable 3 security scenes (Out, Home, Sleep) and delay time before a scene activation;

• Making SOS calls to concierge via SIP or P2P;

• Making сalls to the indicated security number;

Settings:

• Ability to connect a doorbell to the monitor;

• General volume adjustment (6 levels); 

• Volume adjustment and turning on/off the microphone while conversation;

• Ability to change DTMF symbols by pressing which the lock will open;

• Automatic receipt of network settings (DHCP) feature; 

• Ability to change admin passwords;

• Setting the operating time of Do not disturb mode for automatic activation;

• Ability to use custom NTP server for date and time synchronization;

• Ability to reset a device to default settings; 

• Getting settings from Link software;

• Ability to restore devise settings from uploaded backup; 

Integration with Intercom application:

• Audio calls from SP-03 to a mobile device or vice versa;  

• Forwarding calls from SP-03 to a mobile device; 

• Making calls to the assigned concierge number from a mobile device;

• Ability to add IP cameras to the app using Onif or RTSP;

• Ability to watch video from added IP cameras;

• Ability to add contacts for quick calls; 

Integration with Link software:

• Ability to control and manage all devices at one or several residential areas/offices;

• Device status control (SP-03 will send its activity status to the server);

• Device pre-configuration at the Link software and its implementation to devices for quick setting;

• Device management: device search in a system, addition to a residential area/office group, remote pre-configuration, remote update, and settings backup;

• Ability to configure forwarding of calls from SP-03 to other devices;

• Availability of a list with information about calls done from a device (virtual numbers, call duration, and statuses); 

• Ability to turn on/off playing of sound (uploaded to the server) on SP-03 (for example, emergency siren);

Integration with Link application:

• Connection with all devices of a building that were previously added to the Link server; 

• Ability to make audio calls to all added to Link devices;

• Availability of all incoming/outcoming calls history with photos taken during a conversation more than 3 seconds;

General features:

• Ability to connect electromagnetic or electromechanical lock;

• Ability to manage two locks (with SH-42 module);

• Ability to connect exit button; 

• Integration with other ACS: availability of WIEGAND-26, 32, 34, 37, 40, 42, 56, 58, 64 bit output; 

• Availability of proximity sensor: a panel detects motion nearby and activates the panel screen;  

• Availability of backlight for camera and buttons when it gets dark;   

• 3 working modes (Unit, Wall, Apartment) that differ in the amount of entered numbers during a call;  

• Date, time, and weather display on the main screen (for AA-14FB);

• Ability to connect temperature sensor: object or person temperature will be shown on the screen during a call from the panel;

• Creation forwarding queues, up to 8 numbers in a queue; 

• Announcement demonstration during standby mode;

• Sending emails to the specified address with information about denied accesses, their reasons, ways of door unlock, incoming and outgoing calls, errors, device state, and loss of SIP registration;

• Sending photos to the server in case of access is denied, door unlock, incoming and outgoing calls, attempts to enter device settings;

• Availability of system logs list;

• Ability to export system logs;

• Ability to import/export data about flats, forwarding settings, identifiers, and access restrictions; 

• Fast and regular software updates from BAS-IP server;

• Ability to update the software manually via the web interface;

• Ability to update software from a custom server;  

• Availability of open API;

Communication:

• Two-way audio communication with echo cancellation between devices;

• One-way video communication while a call from panel to monitor or vice versa;

• Making calls to monitors or personal devices via multicast, P2P, SIP;

• Quick call to concierge by pressing the button; 

• Ability to create an address book with information about residents, attached identifiers and access codes for each flat/office, amount of created forwards; 

• Ability to create forwarding queues for each flat/office;

• Ability to use an address book for a quick call to flats or offices;

Security:

• Broadcast of an image from panel camera to monitors, concierge terminals, or user devices;

• Ability to transfer RTSP stream from panel camera to an NVR;

• Ability to add RTSP streams (up to 4) for IP cameras video displaying at a monitor while conversation; 

• Ability to use a common master code to open the lock;

• Several ways for lock opening: via an indoor video entry phone (monitor), concierge terminal, the BAS-IP Intercom app, the BAS-IP UKEY app, access card, code, face recognition identification, web interface, QR code, guest URL, license plate number;

• Availability of multi-factor authentication; 

• Availability of UKEY controller: reads EM-Marin/MIFARE®/NFC/Bluetooth identifiers;

• Adding identifiers via the graphical interface; 

• Remote adding/deleting/editing of identifiers via the web interface;

• Access restrictions creation: setting the time and days when the specific identifier will work;

• Free access: ability to set the period for free access to the building by pressing the button;

• Access restrictions, limitation of validity, and the number of passes can be applied to any identifier;

• Ability to connect door sensor: if the door is open for a specified period, a panel will send an alarm message to a concierge or other indicated person and system logs;

• Availability of device protection from opening a lid or attempting to unfasten the device from the surface;

• Availability of log with information about all events and actions with a panel (e.g. numbers of calls, devices that were used to open the lock);

• Availability of Help station and Rescue service features for emergency calls to a specified number (for AV-04AFD only);

Settings: 

• Setting the delay time for opening electromagnetic and electromechanical locks (with SH-40 module);

• Automatic receipt of network settings (DHCP) feature;

• Ability to set up a time during which a lock will be open;

• Automatic synchronization of date and time with NTP server;

• Ability to use custom NTP server for date and time synchronization;

• Ability to set date and time manually;

• Ability to set up an amount of dialed numbers at a panel during a call;

• Ability to turn on/off auto call after indicated amount of dialed numbers;  

• Ability to indicate the concrete number for concierge calls via SIP or P2P;

• Talk time setting;

• Call time setting;

• Ability to choose video quantity (640x480; 1280x720; 1920x1080);

• Ability to indicate RTP data profile;

• Panel volume adjustment; 

• Screen brightness adjustment;

• Ability to turn on/off displaying of address book at an entrance panel;

• Ability to choose receiving Wiegand type; 

• Ability to set identifier representation type (Decimal or HEX);

• Ability to use a custom server to manage access;

• Ability to choose forwardings to one device by one or to all devices at once;

• Ability to change and set custom wallpaper;

• Ability to set the time of announcement demonstration during standby mode; 

• Customization of a message at the main screen, during a call, when the door is unlocked, for errors;

• Customization of a sound for pressing buttons, dialing numbers, during a call, door unlocking, for errors or emergencies;

• Ability to change admin password;

• Ability to restore devise settings from uploaded backup; 

• Ability to reset a device to default settings;

Integration with Intercom application:

• Video calls from a panel to a mobile device or vice versa;  

• Ability to take photos on a mobile device during a call;  

• Ability to forward calls to a mobile device; 

• Making calls to the assigned concierge number from a mobile device;

• Ability to add IP cameras to the app using Onif or RTSP;

• Ability to watch video from added IP cameras;

• Ability to add contacts for quick calls; 

• Ability to open lock/locks from a mobile device; 

Integration with Link software:

• Ability to control and manage all panels at one or several residential areas/offices;

• Device status control (panel will send its activity status to the server);

• Device management: panel search in a system, adding to a residential area/office group, remote pre-configuration, remote update, and settings backup;

• Ability to add all residents and their identifiers;

• Providing guest access to the building: guest URL generating, access code setting, QR codes generating;

• Ability to add photos to the panel memory for Face recognition;

• Creation of access restrictions for one devices group and copying it to others; 

• Availability of all events log from devices: IDs bringing, codes entered, unlocking from a called device, call records, alarms, and all the actions in the system, etc.;

• Ability to export event log from the concrete panel; 

• Ability to configure forwarding of calls from panel to other devices;

• Availability of a list with information about calls done from the panel (virtual numbers, call duration, and statuses); 

Integration with Link application:

• Connection with entrance panels of a building that were previously added to the Link server; 

• Ability to make calls to all added to Link devices;

• Ability to watch real-time video from added to Link entrance panels; 

• Ability to open a lock from the app;

• Ability of the automatic end of a call after opening a lock; 

• Ability to create identifiers (QR code, Access code, URL) for guests or сourier;

• Ability to create access rules for given identifiers (date/time of identifier working start/end, amount of passes, device for access of identifier); 

• Availability of all given identifiers history;   

• Availability of all incoming/outcoming calls history with photos taken during a conversation more than 3 seconds;

Integration with BAS-IP UKEY application: 

• Ability to use smartphone as a digital identifier (with the help of Bluetooth Low Energy technology);

• Ability to get digital identifier remotely (via e-mail, Viber, Messenger, Telegram, printed QR code) 

• Ability to open a door by pressing the application button;

• Ability to open a door by unlocking a smartphone;

Integration with BAS-IP UKEY Config application: 

• Ability to configure multi-format reader;

• Ability to set types of identifiers for reading (ASK, FSK, Mifare, Bluetooth, Inner Range);

• Ability to change a type of output interface (Wiegand Auto; Wiegand 26-64 bit; Touch Memory; RS 232);

• Ability to encrypt or diversify MIFARE identifiers for safety improvements;

• Ability to choose and configure MIFARE profiles;

• Ability to configure indication process (duration, marks for card reading, and standby mode);

• Ability to set distance for reading a card; 

• Ability to update device firmware;  

• Ability to save settings from one device and copy them to others;

• Ability to restore settings from backup copy;