In order to mount the doorbell, it is necessary to create a hole or recess in the wall with the dimensions of 85 × 180 × 45 mm. Additionally, make sure to prepare a power cable, additional modules, and a local network connection.
...
IMPORTANT!
• It is strictly forbidden to supply more than + 12.5V to the SH-45 button.
• It is not allowed to exceed the current flowing through the switch contacts of more than 100 mA.
• It is strictly forbidden to use the SH-45 button to use the power supply used to power the lock!
It is necessary to use a separate power supply to which locks and other high-consumption equipment are not connected!
| Info |
|---|
While the proximity button is designed to be waterproof and dustproof with an IP68 rating, it is still recommended to avoid outdoor installation if there's a possibility of rainfall in your area. This is to prevent any false positives caused by a dense wall of rain in front of the button. To avoid unintentional activation of the button sensors during rainfall, it's crucial to install the proximity button in a way that ensures the dense rain wall extends no closer than 800 mm from the button's face. |
...