Versions Compared

Old Version 14

changes.mady.by.user BAS-IP

Saved on

compared with

New Version Current

changes.mady.by.user BAS-IP

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Log in to the entrance panel web interface. By default, the username is admin, and the password is 123456.

  2. Go to the Advanced tab > Wallpaper section.

  3. Click Select File and choose a necessary image. It must be in one of the formats .jpg, .jpeg, .png, .bmp, .gif, and up to 10 MB size.   

  4. Submit settings to set new wallpaper.

...

  1. Log in to the entrance panel web interface. By default, the username is admin, and the password is 123456.

  2. Go to the Advanced tab > Announcement section.

  3. Enable the feature.

  4. Enter the URL of the ad (RTSP stream or HTTP page).

Info

Configuration of RTSP stream display using the VLC media player via user interface

  1. Open the VLC player. 

  2. From the Media menu, select the Stream... option.

  3. In the Open Media tab, select the video you want to stream and click Add... button.

  4. Press the Stream button and Next in the following window. 

  5. Select the RTSP option from the drop-down list and then press the Add button.

  1. In the new RTSP tab, enter the path to your stream (e.g., /vlc or any name you want). The port can be left as 8554. Press the Next button when all data are entered.

  1. Make sure that the Activate Transcoding option is enabled. Streaming video must be with H.264 codec, so it is requred required to convert it.

  2. Select Video - H.264 + MP3 (MP4) from the Profile drop-down list. Then click Next. 

  3. Click Stream. Now this stream is available at  at the rtsp://IP address of the PC from which the stream is displayed:port No./path entered in the step Step 6, e.g., rtsp://192.168.0.101:8554/vlc.

  4. To repeat the stream (and not just once), click where shown until you see the repeat icon for one file.

  1. Log in to the entrance panel web interface. By default, the username is admin, and the password is 123456.

  2. Go to the Advanced tab.

  3. In the Announcement section, enter the rtsp://IP address of the PC from which the stream is displayed:port No./path, e.g. rtsp://192.168.0.101:8554/vlc.

  4. Submit settings.     

Configuration of RTSP stream display using the VLC media player via CMD

You can set the display of your RTSP server over your local network with the help of a VLC media player. Note that the streaming device and all the receiving device(s) should be connected to the same router for the streaming to work. Also, be aware that streaming video must have 480x272 resolution). 

  1. Open CMD. 

  2. Go to the catalog where vlc.exe is, e.g., C:\Program Files\VideoLAN\VLC.

  3. Enter the following, where video.mp4 is a video name, C:\videos\video.mp4 is a path to the video that is going to be streamed, after rtsp://192.168.0.101 is the IP address of the PC from which the stream is running (must be changed according to your data).

    Code Block
    vlc.exe C:\videos\video.mp4 --sout="#rtp{sdp=rtsp://192.168.0.101:8090/stream}"

  4. As a result, the VLC player will open, and the stream will start. 

  5. To repeat the stream (and not just once), click where shown until you see the repeat icon for one file.

  1. Log in to the entrance panel web interface. By default, the username is admin, and the password is 123456.

  2. Go to the Advanced tab.

  3. In the Announcement section, enter the rtsp://IP address of the PC from which the stream is displayed:port No./stream, e.g. rtsp://192.168.0.101:8090/stream.

  4. Submit settings. 

Сonfiguration of the automatic playback of videos posted on the website

If you want to use HTTP page with a video, it is required to set video automatic playback. After entering the URL you must set the following parameters for the video tag in the Content field (via Developer Tools):

for YouTube video: add "&autoplay=1" to the video’s embed code right after the video ID (the series of letters that follows "embed/"). Mind screen resolution to indicate width and height correctly.

Example: <iframe width="480" height="272" src="https://www.youtube.com/embed/D6Ac5JpCHmI?&autoplay=1"frameborder="0" allowfullscreen></iframe>

  • for any pages:
    <video autoplay>
    <source src="http://my-source.com/movie.mp4" type="video/mp4">
    <source src="movie.ogg" type="video/ogg">
    Your browser does not support the video tag.
    </video>

    1. Set timeout for ad displaying (15 - 900 minsec).

    2. Submit settings.

    ...

    Panel
    panelIconIdatlassian-light_bulb_on
    panelIcon:light_bulb_on:
    panelIconText:light_bulb_on:
    bgColor#DEEBFF

    Configure a local server to store ads:

    If the equipment does not have access to the Internet, and there is no way to place files on any external resource, you can set up your own file storage on a local server. 

    Here is an example of settings for the Ubuntu operating system:

    1. Install the npm service.

      Code Block
      apt install npm

    2. Install the httpHTTP-server service.

      Code Block
      npm install --global http-server

    3. After installation is complete, you can run the service.

      Code Block
      http-server . > http.log 2>&1 &

    By default, the server will be available on port 8080, and the files will be stored in the ./public directory (if there is no such directory, then the files will be in the users home directory). The service itself will start running in the background.

    However, we recommend you to create a new directory, so that users do not have access to your servers system directories. To do this, run the following commands:

    ...

    Panel
    panelIconIdatlassian-light_bulb_on
    panelIcon:light_bulb_on:
    panelIconText:light_bulb_on:
    bgColor#DEEBFF

    Example of settings for the Windows operating system:

    1. Install NodeJS for your system.

    2. Create a folder on your computer to store advertisements.

    3. Open a command prompt (cmd) and go to the created folder.

      Code Block
      cd C:/way/to a folder

    4. Install the http-server.

      Code Block
      npm install -g http-server

    5. Launch httpHTTP-server in the created folder.

      Code Block
      http-server

    Storage will be available on port 8080.

    ...

    1. Generate an RTSP stream of the camera according to its manual.   

    2. Log in to the device web interface. By default, the username is admin, and the password is 123456.

    3. Open the Advanced tab.

    4. Enter generated at 1st step URL at RTSP feed field. You can add up to 4 RTSP streams.

    ...

    Info

    Using endpoints it is possible to configure more settings for emergency cases then than text and sound notifications.  

    ...

    1. Log in to the device web interface. By default, the username is admin, and the password is 123456.

    2. Open the Advanced tab and scroll to the Custom notifications section.

    3. Choose what message you want to change:

    • keys pressing: a text on the main screen. You can enter, for example, the concierge number, the name of the residential complex, or tips for correct data entry to call an apartment;

    • ring back: a text shown during an outgoing call. By default, the message Call is displayed on the screen;

    • door unlock: a text shown when the lock is opened. By default, Welcome! is displayed;

    • errors: a text shown when entering an unregistered number or , access code, or an unregistered/not valid identifier is used. By default, the message Error is displayed on the screen;

    • emergency: a text shown in case of extraordinary situation when the corresponding endpoint is used;

    • Wiegand output. External access control mode (relevant only if the panel is connected to the external controller via Wiegand and the corresponding feature is enabled): a text from the field is shown when the lock is opened by an identifier added to the external controller.

    ...

    1. Log in to the device web interface. By default, the username is admin, and the password is 123456.

    2. Open the Advanced tab and scroll to the Custom notifications section.

    3. Enable the event sound you want to change: keys pressing, ring back, door unlock, errors, emergency, an indication of call in progress, an indication of communication in progress, ordoor unlocking if the external Wiegand controller is connected (Wiegand output. External access control mode).

    ...