...
For connection you will need:
an Ethernet UTP CAT5 or higher cable connected to a network switch/router;
The maximum length of the UTP CAT5 cable segment should not exceed 100 meters, according to the IEEE 802.3 standard.
power supply at + 12V, 2 Amps;
wires must be brought for connecting the lock and additional modules (optional).
Info |
---|
You can connect any type of electromechanical or electromagnetic lock for which the switched current does not exceed 5 Amps. |
The following are typical connection schemes of all elements to the entrance panel:
Table of Contents |
---|
Connection using an external power supply and an electromagnetic lock
...
Connection using an external power supply and an electromechanical lock
...