Time / Language
Select “Time / Language” to access the language and time settings:
...
Web language
Type: Used web language
NTP
Time zone: Time zone is GMT.
Primary server: The address of the primary NTP server.
Secondary server: The address of the additional NTP server.
Update interval: Interval of updating the time (> = 3600 seconds).
System time: Current system time.
Call Feature
Select “Call Feature” to access the call settings.
...
Mode: Current operating mode. Phone or custom.
Mode settings
Return code when refuse: The code returned by the device in case of call refusing (404 Not Found, 480 Temporary Unavailable, 486 Busy Here, 603 Decline).
Auto answer delay: Delay time until the panel makes auto answer (0 - 5 seconds).
Auto answer mode: The function which allows selecting the audio or video transmission during a call.
Multicast codec: Codec for calls via Multicast (PCMU, PCMA, G722, G729).
Direct IP: Call using P2P.
| Note |
|---|
For proper operation of the internal protocol, this function must be enabled. |
Voice
Select “Voice” to access the voice settings:
...
Microphone volume
Volume: The microphone volume level (1-15).
Speaker volume
Speaker Volume: The speaker volume level (1 - 15).
Open door warning
Open door warning: Enable/disable sound when the door is opened.
Open door failed warning: Enable/disable sound when you place unregistered card.
Upload sound for unlock
Here you can upload the audio file that will be played when the door is opened (file format: wav, size: <200KB, sampling: 16,000, Bits: 16).
Upload sound for error
Sound when there is an error: The audible sound may be enabled/disabled when you place unregistered card. (file format: wav, size: <200KB, sampling: 16,000, Bits: 16).
Multicast setting
...
Multicast settings
Number of listened addresses: Number of IP addresses which are listened to find out the multicast requests (Off, 1 - 10).
Priority: The priority of addresses listening.
Call log
Select “Call log” to access the call history:
...
In this tab, it is possible to make an outgoing call by pressing the corresponding number in the "Number" column.
Door log
Select “Door log” to access the door log history:
...
In this tab all access by card events are displayed.