You can open basic settings from a panel or from the web interface. To add face identifiers, open the web interface ( and go to the Identifiers tab).
To enter the system settings, you must open the Pincode menu, enter the password for the settings menu (by default, it is *123*) and press the Call button. To go to the necessary menu, you need to press its icon.
Visitors faces can be used as an identifier to get access to a place. In this you can complete the following actions:
enable/disable the face recognition feature;
choose a suitable similarity level (the lower the similarity level, the greater the error can be in scanning a face and granting access):
Low: the minimal similarity is necessary for access (changes in appearance (glasses, beard, presence of a hat) will not be taken into account);
Normal: some changes in appearance are taken into account, but not detailed (recommended for homes and offices);
High: the maximum similarity is necessary for access (recommended for high-security places).
set the appropriate mode (Live Detect):
Software: the software recognition algorithm is used, and there is a possibility of giving access by photos;
Anti-spoofing: more detailed software recognition algorithm is used to prevent access by photos;
3D (is available for panels with a built-in 3D sensor): detailed face recognition using IR sensors and building a face heat map to prevent spoofing.
| Info |
|---|
If you enable the 3D mode on a panel without a 3D sensor, the software mode will be activated instead. |
enable/disable automatic start of face recognition when motion is detected;
delete all registered faces from the panels.
...
...