...
4. After it's started, place your mouse cursor in the top right corner so you can see the software window.
...
5. Press the Run button to open the menu and select system settings.
...
6. Select the Hardware tab and chose hard drives for records and press Apply.
...
7. Right-click on LOCALHOST to open the menu, and select Create object and Video capture device.
...
8. Set up Enter parameters:
Where:
- Type
type: RTSP;
IP address: rtsp://admin:123456@192.168.88.161:8554/ch01
, where 192.168.88.161
-is an IP address of your BAS-IP device;
- Port
port: 8554;
- Name
name: admin;
- Password
password: 123456.
...
9. Right-click on the Video capture device to open the menu, and select Create object and Camera.
...
10. Right-click on LOCALHOST to open the menu, and select Create object, and Video capture device again with the next following parameters.
Where:
- Type
type: SIP;
IP address of your BAS-IP device;
- Port
port: 5060.
...
11. Right-click on the Video capture device to open the menu, and select Create object and Sensor, it and the program automatically fills parameters.
...
12. Right-click on LOCALHOST to open the menu, and select Create object and Audio card.
...
13. Type Enter the Name for of the Audio card and press click Apply.
...
14. Select Board: IpCam RTSP.
...
15. Right-click on the Audio card to open the menu, and select Create object and Microphone.
...
16. Select Channel: IpCam RTSP.
...
17. Go back to the Camera created in step 9 and set the Recording audio parameters. You can check if the video is working by pressing the Video button.
...
18. In the same way, as described in Repeat steps 12-17 to create an Audio card and Microphone for the operator.
19. Right-click on LOCALHOST to open the menu and , select Create object, and then Intercom Subsystem.
...
20. Right-click on Intercom Subsystem to open the menu and , select Create object and then Intercom.
...
21. Parameters must correspond with objects that were created earlier, if not they are different - change them.
...
22. Right-click on LOCALHOST to open the menu and , select Create object, and then SIP-terminal.
...
23. Set up parameters.
Where:
...
Enter parameters:
network IP should be the same as your PC
.;
RTP ports range from 10000 to 20000;
...
24. Right-click on SIP-terminal to open the menu, and select Create object, and then SIP-device.
...
25. Set up Enter the next parameters.
Where:
- User
user ID is a SIP number;
IP address of the BAS-
ipIP device;
- Password
password can be any value;
- Video
video and audio selected for corresponding devices.
...
26. Right-click on SIP-terminal to open the menu, and select Create object, and then SIP-operator.
...
27. Set up Enter the operator Number.
...
28. At this step there must be created:
- Video
video capture device with a camera;
- Video
video capture device with a sensor;
- Audio
audio card for panel with microphone;
- Audio
audio card for the operator with a microphone;
- Intercom
intercom subsystem with intercom;
SIP terminal with
sip-SIP device and
sipSIP operator.
29. Goto Go to the Interfaces tab, the checkbox on for the Display must be set.
...
30. Right-click on Display to open the menu, and select Create object, and then Audio player.
...
31. Press Click the All button to add microphones.
...
32. Right-click on Display to open the menu and , select Create object, and then Monitor.
...
33. In the List of cameras add created earlier camera.
...
34. Right-click on Display to open the menu and , select Create object, and Inercom Control Monitor.
...
35. Set up Specify Server, Position, and Microphone parameters.
...
36. Right-click on Display to open the menu and , select Create object, and SIP panel then.
...
37. Select the operator number.
...
38. Go to the Programming tab and create a new Macros.
...
39. Add a new Script and change the Time schedule to Always.
...
Where script:СКРИПТ НЕПРАВИЛЬНИЙ
if (Event.SourceType=="MACRO" && Event.Action=="RUN" && Event.SourceId=="1") { var xmlhttp=new ActiveXObject("Microsoft.XMLHTTP"); xmlhttp.open("GET","http://admin:123456@192.168.88.161/cgi-bin/ext/unlock.cgi",true); xmlhttp.send(); }
...
Where admin is the login of the BAS-IP device
...
, 123456 is the password to access the device, and 192.168.
...
1.16 is the device IP address.
40. Macro1 option should appear, pressing it will open the lock.
...
41. Press the display button and select Display 1, . SIP panel , and camera monitor now should apperappear.
...
42. Open the web page of your BAS-IP devices device and log in. Default The default login is admin, and default the password is 123456.
...
43. Goto Go to the Network tab and set up enter the device IP address of your devicein the Network settings part.
...
44. Goto Go to the Panel tab and enter SIP settings.
Where:
fill in the Apartment settings and SIP settings parts with the following parameters and values:
mode: personal;
building: 1;
unit: 1;
floor: 11;
apartment: 11;
device number: 1;
enable SIP;
proxy: sip:IP address of your Axxonsoft Intellect server, e.g., sip:192.168.88.31;
realm: 192.168.88.31
-is the IP address of your Axxonsoft Intellect server;
server STUN IP address, e.g., stun.l.google.com;
- 1000 - number
port of the STUN server;
user: 1000 (the number you created earlier in step
.Password -25);
password that you created earlier in step 25.
...
...
| Info |
|---|
Note: After entering SIP settings |
...
, reboot the web page (this can take several times) and wait for the indicator in the top left corner |
...
becomes green. |
45. Goto Go to the Forward settings and add a new forward.
New forward and enter:
Apartment number: 1111.
Forward number in format sip:
intellect@ipnumber@ip_address_of_server
.1002 -, where 1002 is the number of the SIP operator and 192.
192.196.88.31
-is the IP address of the Intellect server.
...
46. After allsettings has been done you shold be ablle to call, view all settings, you will be able to call the device, view its camera and open a lock on the BAS-IP intercom.