Enable Device Integration in System Settings
To enable device integration, go to the System Settings > System-wide Settings > General tab, and enable the 'Enable Device Integration' option. Then press Save. (You must do a full download to all your panels/locks after enabling)
Once enabled, under 'Configuration' you will see a new menu called 'Integration Devices' and also an 'Integration Profile' drop down on the general tab under the Configuration > Reader’s screen.
“New Integration Profile Shown Under Reader Screen”
Integration (Bas-IP) Configuration
Under Configuration > Integration Devices, Press New and Enter a Device Name.
Select Intercom as the Integration Device Type and BAS-IP Intercom as the Integration Device
Enter the Device IP Address along with the username and password for that device
Select the device Time Zone (This is the Time Zone of your BAS-IP Device)
Press Save when complete
To find the Integration Device IP address, open a Windows command prompt and type "arp -a". This command will show you the connected IP addresses along with their MAC addresses. You can then locate the MAC address of the Integration Device from the list. The username and password are the Integration Devices administration credentials.
