Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

In the tab, you configure settings for apartment, device, calls, and SIP calls.

Apartment Settings

For correct panel functioning, you must enter information about its logical address (more information about logical address formation find here):

  • building number; 
  • unit number; 
  • floor number;
  • apartment number;
  • device number. 

SIP settings

These settings are required for the correct work of calls via SIP protocol. If you use the BAS-IP Link server we recommend configuring SIP settings remotely using the Link (via MQTT protocol) and then sending them to the device. 

Step-by-step guide how to get SIP nubmers and configure a panel for SIP calls if you use BAS-IP SIP server you can find here.

To configure SIP calls for the panel, you must enable device SIP registration and enter the following parameters: 

  • SIP server proxy that can be represented by both an IP address and a domain name;
  • SIP server address that can be represented by both an IP address and a domain name;
  • port of the STUN server;
  • user SIP number (up to 20 characters);
  • SIP user ID (optional);
  • password for SIP number (up to 20 characters);
  • transport type: UDP/TCP/TLS. 

Call settings

At this part you can: 

  • enable/disable a call to the specified (concierge) number when pressing a button connected to the door sensor input (Concierge call mode must be set);
  • indicate the direction (concierge number) to which the call will be made when pressing the connected button;
  • configure call max time (period (10-120 sec) after which the panel automatically ends an outgoing call if there is no answer).
  • configure talk max time (period (10-300 sec) after which the panel automatically ends the outgoing conversation).

⠀

⠀

⠀

⠀

⠀

⠀

⠀

⠀

⠀

Device settings

In this section you can: 

  • select preferred video quality (resolution) (640х480/1280х720/1920x1080 (optional));
  • select preferred RTP data profile;
  • adjusts a volume level of a panel speaker; 
  • enter RTSP username (login to get access to a panel RTSP stream);
  • enter RTSP password (password to get access to a panel RTSP stream);
  • enable/disable a proximity sensor for the panel automatic turning on the keyboard backlight and face recognition feature when motion is detected at a distance of 50 cm; 
  • select the appropriate proximity sensor mode: 
    • all time mode: the sensor is active all time and triggered when motion is detected at a distance of 50 cm;  
    • adaptive mode (appropriate when the panel is installed in front of a wall or an object): the sensor gets used to a constant object in front of it and does not react to it, but only triggers when there is movement;  
  • enable/disable connected to the panel temperature sensor. During an outgoing call, the panel will take the temperature of the person in front of the panel and display it on the called person internal monitor during the call/talk.


  • No labels