In this section, you can configure the following parameters:
- available identifier formats for the reader to work with:
ASK: enabling signal transmission in amplitude-shift keying that is used in EM-Marin Classic cards and keychains;
With amplitude-shift keying, each digital symbol is associated with its own carrier signal amplitude. The frequency and phase of the keyed signal remain unchanged. Amplitude-shift keying is rarely used in practice, as it is the least antijamming. And it is usually used in combination with other keyings.
The figure below shows a graph of a binary sequence of 0 and 1 and, corresponding to it, a graph of an amplitude-shift keyed signal. A low level encoding of a binary signal uses an amplitude of 0.5 V, and a high level uses a 1 V amplitude of a sinusoidal carrier signal.
FSK: enabling signal transmission in frequency-shift keying that is commonly used in Temic cards and paired with ASK keying;
With frequency-shift keying, each digital symbol is associated with its own carrier signal frequency. The amplitude and phase of the keyed signal remain unchanged. The figure below shows a graph of a binary sequence of 0 and 1 and, corresponding to it, a graph of an frequency-shift keyed signal. The low level corresponds to a frequency of 1 kHz, and the high level corresponds to a frequency of 0.5 kHz of a sinusoidal carrier signal.
- Mifare: enabling signal transmission for working with Mifare cards;
- Bluetooth: enabling signal transmission for working with Bluetooth identifiers (UKEY);
- Inner Range: enabling the operation with specialized IR cards.
- type of output interface for data transfer to the panel: Wiegand Automatic, Wiegand-26, 32, 34, 37, 40, 42, 56, 58, 64. Selected Wiegand type must coincide with the indicated in the panel settings one;
- encryption password for UKEY identifiers;
- Mifare profiles.
