You can open basic settings from a panel or from the web interface. To add face identifiers, open the web interface (Identifiers tab).

To enter the system settings, you must open the Pincode menu, enter the password for the settings menu (by default, it is *123*) and press the Call button. To go to the necessary menu, you need to press its icon.

Visitors faces can be used as an identifier to get access to a place. In this you can: 

• enable/disable the face recognition feature;

• choose a suitable similarity level (the lower the similarity level, the greater the error can be in scanning a face and granting access): 

  • Low: the minimal similarity is necessary for access (changes in appearance (glasses, beard, presence of a hat) will not be taken into account);

  • Normal: some changes in appearance are taken into account, but not detailed (recommended for homes and offices);

  • High: the maximum similarity is necessary for access (recommended for high-security places).

• set the appropriate mode (Live Detect): 

  • Software: the software recognition algorithm is used, and there is a possibility of giving access by photos;

  • Anti-spoofing: more detailed software recognition algorithm is used to prevent access by photos;

  • 3D (is available for panels with a built-in 3D sensor): detailed face recognition using IR sensors and building a face heat map to prevent spoofing.

• enable/disable automatic start of face recognition when motion is detected;

• delete all registered faces from the panels.