Mechanical mounting

Before mounting the panel, it is necessary to provide a hole or recess in the wall with dimensions 96×152×60 mm (for flush mounting). Dimensions of the bracket (flush box) = 94×151×45 mm. It is also necessary to provide for the supply of power cable, add. modules and local network. 

Attention:
The hole at the bottom is designed to drain the water. Do not intentionally close it. Also, it is necessary to make a drain for water at the bottom of the niche which will serve to divert water out.

Installation height recommendations: 
Installation of the panel should be at a convenient height for you. The approximate installation height is 160-165 cm on the level of the camera.