Setting SIP number on AV-07T/B
- BAS-IP (Unlicensed)
Searching the IP address of the outdoor panel
After the outdoor panel and your PC have connected to the same local area network, run the “AV07T Device manager” to determine an IP address of the outdoor panel:
Press the Scan button and program window will display IP addresses of all AV-07T outdoor panels, which are connected to the local network. It is possible to change the basic network settings, update a firmware of the outdoor panel and programmatically restart it.
By default, the call panel is configured to receive network settings automatically via DHCP. To determine it on the network, you must connect the panel to a router with a DHCP server enabled.
In the Internet browser, in the address entry line, you must enter the IP address of the panel, after which the user name and password entry window will appear.
Username to enter the settings: admin.
Password: Password to access the WEB interface (default password: admin).
After you have entered the WEB interface, select "Account-> Basic" to go to the SIP account settings.
SIP Account
Status: Registration Status.
Account: Number of the customizable account.
Account Active: Enable/disable the selected account.
Display Label: Account ID.
Display Name: Name (Caller-ID) that is displayed for dialed subscriber.
Registration Name: The account name used to register on the SIP-server.
Username: The name used to register on the SIP server or proxy server.
Password: Password for registration.
SIP server 1
Server IP: SIP Server address.
Port: Registration port (by default is 5060).
Registration period: The term of client registration on the server (by default is 1800 seconds).
SIP server 2
Server IP: SIP Server address.
Port: Registration port (by default is 5060).
Registration period: The term of client registration on the server (by default is 1800 seconds).
Outbound proxy server
Proxy: Enable/disable of proxy server.
Server IP: Proxy server address.
Server port: Registration port of the proxy server.
Backup IP address: Backup address of proxy server.
Backup port: Registration port of backup proxy server.
Transport
Transport: The type of transport used for data transmission (by default is UDP).
NAT
NAT: Enable/disable the usage of the STUN server.
STUN server address: The address of the STUN server.
Port: The port of the STUN server.