How to update firmware of v3 devices using Remote Upgrade Tool?
- BAS-IP (Unlicensed)
The firmware file you are going to install must be strictly designed for your device model. If you install firmware for AA-05 onto your AP-07 device, it will malfunction.
Extract the downloaded firmware file to the root of any disk in the system (or to a folder no more than two attachments deep, the folder name must be in Latin letters). Files named Resources and Services are essential for update.
Open the Remote Upgrade Tool.
Find the IP address of the required device from the list and click it. You can check device IP address in the web interface (Network or Dashboard tabs).
Click Select.
Pick the extracted Resources file and open it.
Click Upgrade.
Do not turn off the power or interrupt the firmware update, it may cause damage to the device!⠀⠀
At the end of the process, the Status will be shown as Success.
Click Select to update the firmware with the second file.
Pick the extracted Services file and open it.
Tick Auto Reboot.
Click Upgrade.
Do not turn off the power or interrupt the firmware update, it may cause damage to the device!⠀⠀
At the end of the process, the Status will be shown as Success. The device will reboot.