Integration with Integrity software (Inner Range)

1. Download and install Integrity Pro.
2. Download and install the Intercom BAS-IP Plugin.
3. Get the required licenses.
4. Run Integriti System Designer. Default login and password are 'installer' (all lower case characters).

Open

5. Open Integrations and click New Integrated device.

Open

6. Select the BAS-IP Intercom plugin and click OK.

Open

7. Click on the connection settings and type in all required parameters:

• IP address of the BAS-IP device;

• login to BAS-IP settings, by default, is 'admin'.

• password to BAS-IP settings, by default, is '123456';

• optional RTSP Username, the same as Login;

• optional RTSP Password, the same as Password;

• video Streaming Supported checkbox must be set;

After entering all parameters click the Save icon in the top left corner.

Open

8. Now that device is added. You can use it in Integrity Pro Gatekeeper software, which allows controlling locks and watching video from the camera.

Open

BAS-IP Configuration

Event Monitoring

Steps to Configure Log Sending to Integriti:

1. Open the intercom’s web interface and navigate to Network -> Management system.

2. Enable the following options:

   • Use BAS-IP Link server

   • Send realtime logs to server

3. In the URL field, enter the IP address of the PC where the Integriti integration server is running.

4. If event monitoring authentication is required, enter the password in the designated field.

5. Reboot the intercom device to apply the changes.

Open

Video Streaming

Steps to Configure RTSP for Live Video Stream in Integriti:

1. Open the intercom’s web interface and navigate to Panel -> Device settings.

2. Add an RTSP Username and RTSP Password in the respective fields to enable live video streaming in Integriti.

3. Reboot the intercom device to apply the changes.

4. If the RTSP options are not available, use the standard intercom login credentials to access the live video stream.

Open