Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

In this menu, the basic network settings and the log display are set.

Network settings

DHCP: Enable/disable the mode of receiving network settings automatically.

IP: Device IP address.

By default, the SP-02 can have a DHCP mode enabled.

Subnet mask: Subnet mask.

Default gateway: Default gateway address.

Primary DNS Server: The primary DNS server address.

Secondary DNS server: The address of the secondary DNS server.

Protocol: The network protocol used (IPv4 or IPv6). 

Option is enabled if DHCP is disabled.

Log display settings

Enable Print: Enable/disable logging mode.

Log level: Select the preferred logging level, where 0 is the minimum level, 7 is the most detailed log.

Enable low-level logging: Enable/disable low-level logging to display it further.

Output to: Select the preferred output of log files (console, local file, syslog, and local file).

Syslog Server IP: The IP address of the log collection server.

Local file: The path to the location of the local file

  • No labels