/
Device settings
Document toolboxDocument toolbox

Device settings

Owned by BAS-IP (Unlicensed)
Last updated: Nov 24, 2023
1 min read

In this section, you have access to the following data: 

  • device serial number;

  • reader current firmware version;

  • installer code to access device settings (by default it is 123456 or 000000). 

If the installer code is lost:

  1. Power down a panel.

  2. Short the green and white wires (on the panel backside) that come from the reader.

  3. Power up the panel.

  4. Open the UKEY config app and connect to the reader without the installer code. 

  5. Go to the device settings and enter new installer code. 

  6. Save and apply new settings. 

  7. Power down the panel.

  8. Open the green and white wires.

Related content

More settings
More settings
BAS-IP UKEY Config
More like this
Settings
Settings
BAS-IP UKEY Config
More like this
BAS-IP UKEY Config
BAS-IP UKEY Config
BAS-IP UKEY Config
More like this
How to update card reader firmware using BAS-IP UKEY Config?
How to update card reader firmware using BAS-IP UKEY Config?
FAQ
More like this
How to change the Wiegand type of panel reader?
How to change the Wiegand type of panel reader?
FAQ
More like this
An identifier obtaining
An identifier obtaining
BAS-IP UKEY
More like this