Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

In this tab, you have access to the current MQTT client state and the ability to make remote outgoing calls to other devices. 

Outgoing call 

With the help of this feature, you do not need to be near the panel to check the connection or correct the operation of calls between the panel and a monitor, softphone, etc. To make a call, enter the number of the callee device (can be a logical address, SIP number, or number for P2P calls) and click the Call button. To end the call, click Stop.

The call will be displayed on the panel, and the event "Outgoing call made from the web to the number" will appear in the logs.

MQTT client debug 

In this section, you can get the current MQTT client state or its actions: the client is enabled, the client is successfully connected, etc. Click Start to get information, and the corresponding button to stop the process.

  • No labels