Mechanical mounting

Before mounting the panel, it is necessary to provide a hole or recess in the wall with dimensions 143×353×61 mm (for flush mounting). Dimensions of the bracket (mounting box) = 141×351×60 mm. It is also necessary to provide for the supply of power cable, add. modules and local network.

Attention:
The hole at the bottom is designed to drain the water. Do not intentionally close it. Also, it is necessary to make a drain for water at the bottom of the niche which will serve to divert water out.

Installation height recommendations:
Installation of the panel should be at a convenient height for you. The approximate installation height is 160-165 cm on the level of the camera.