Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

You can use this tab to set the parameters of the access control system and add identifiers.

https://www.youtube.com/watch?v=Ju7nHodVhMU

Access management 

In this section, you can set information about:

  • Wiegand type of a panel card reader. Wiegand-26, Wiegand-34, and Wiegand-58 types are available for work.

  • Identifier representation systems. All identifiers can be displayed in Decimal and HEX numeral systems. 

Identifiers 

You must add all identifiers in this section if they are used to open the lock and call the elevator to a specified floor or/and provide access to selected floors for different identifiers. 

How to add an identifier to the elevator controller

  1. Log in to the device web interface. By default, the username is admin and the password is 123456.

  2. Go to the Access management tab > Identifiers section.

  3. Click New identifier and enter all required data: 

    • Identifier type (Card/Access code/UKEY/QR-code/Face ID);

    • Identifier number (it is better to copy it from panel settings);

    • Owner name;

    • Owner type (Owner/Guest);

    • One or some floors to which the ID will have access; 

    • One or some apartments (the ID will have access to a floor/s where the apartments are);

  4. Confirm entered data.  

You can enter either only the Floor or only the  Apartments field or fill in both. If you fill in the Floors field, the ID owner will be allowed to go only to selected floor/s.

If you fill in the Apartment field, the ID owner will be allowed to go to a floor/s where the selected apartment/s located. 

By filling in both parameters you can make access restrictions more flexible. 

As a result, the table with all information about identifiers will be created. If necessary, you can edit the informationin table or deleteone or more identifiers.

Also, there is an option to filter identifiers. To do this, you need to click the Filters button, set the necessary parameters, and click Apply:

  • In the Field name line, select the search parameter:

    • Identifier number: the display of IDs with the entered number; 

    • Identifier type: the display of IDs with the chosen type;

    • Owner name: the display of IDs with the entered owner name; 

    • Owner type: the display of IDs with the chosen owner type;

  • Choose search condition: 

    • Equal: the display of IDs according to a selected parameter. So, if you select owner type equal to a guest, you will see all guest identifiers; 

    • Not equal: the display of IDS that do not correspond to the selected parameter. So, if you select owner type not equal to a guest, you will see all owner identifiers; 

  • Choose Field Value depending on the selected column.

  • No labels