Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

After verifying the device completeness, you can proceed to the monitor connection.

To connect the monitor you need: 

  • an Ethernet UTP CAT5 or higher cable connected to a PoE switch or to a normal switch/router; 

  • power supply at +12 Volts DC if there isn't PoE;
  • wires must be brought for the connection of alarm loops and home automation (optional);

Here are typical connection schemes:

Connection using an external power supply 


Connection using power supply from PoE



  • No labels