Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

On the main screen, you can find information about: 

  • data ​​that must be entered to call the apartment (to call the required apartment, you need to enter from 4 to 10 digits, depending on the current panel mode);

  • the combination that must be entered to call the concierge (to call the concierge, you must enter the combination 0000# or press the concierge or info button in the upper right corner of the keypad);

  • a button that opens the access code menu (to open the menu press #, enter the access code, and press # to confirm);

  • a button to cancel an action or go back to previous the menu (press * to cancel);

  • buttons that open the address book, which displays a list of contacts (sorted by name) for searching and calling an apartment if the exact logical address of the monitor is not known (to open the address book, press the up / down arrows, and then press # to call). By default, the address book is disabled, you can enable the option in the Apartments section of the web interface.

Press * to exit the main screen or it will be done automatically, after 30 seconds of inactivity.

The current statuses of the devices connection to the network and SIP are also displayed in the lower right corner.

You can change the text displayed on the main screen in the Advanced tab of the web interface.

  • No labels