Versions Compared

Version Old Version 12 New Version 13
Changes made by

BAS-IP

BAS-IP

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Go to the Devices tab of the Device management section.

  2. Click the plus icon in the left low corner.

  3. Enter the device name.

  4. Select its type: panel, monitor, access controller, elevator controller, IP camera.

  5. Select the device model.

  6. Indicate the device Serial number (check the Dashboard tab of the device web interface or device box). If you are adding an IP camera, enter any number in this field.

  7. Select a group/subgroup where the device is installed.

  8. If necessary, set location geodata for panels. This data is required for the Link app, when a visitor with a pass (added to Apple Wallet) approaches the available panel (with location), the pass will be automatically shown.

  9. Add a description, if necessary.

  10. Enable using a camera to identify license plates, if necessary. 

  11. Allow remote lock opening (from the device web interface, via API), if necessary. 

  12. Enter network settings for server and panel interaction:

...

Info

Also, the same network settings as for the server must be entered in the device web interface. The management system must be enabled for the device:

  1. Log in to the device web interface. By default, the username is admin, and the password is 123456.

  2. Go to the Network tab > Management system section.

  3. Select the necessary protocol: HTTP or MQTT (is recommended to use) in the Mode field.

  4. Enter all required data. 

  5. Submit settings.

    1-20240125-120123.png

 Detailed instructions are here.

  1. If required, configure additional settings in the corresponding section for the panel or IP camera:

  • select the ID of the alarm output relay on the camera that must be activated when the license plate is recognized (available for IP cameras).

  • set timeout of the relay activity (available for IP cameras).

  • mark that the panel that is used with an additional camera for license plate recognition (available for panels).

Panel
panelIconIdatlassian-light_bulb_on
panelIcon:light_bulb_on:
panelIconText:light_bulb_on:
bgColor#E6FCFF

For details about the usage of license plates as identifiers, see How to configure license plate recognition.

...

  1. Click the Save button in the left low corner when all required data will be entered.

Note

Users must be added to the group first, then devices must be added.

If you add devices before adding a user to a group, a feature of automatic creation of forward rules will not work correctly. If you add a device to a group without a user, device virtual number applies to an administrator, but not to the group user. So, the created forwarding queue will include the administrator instead of the user.    

...