...
When connecting electromagnetic locks, the trimming resistor needs to be rotated to the right, and adjust the delay time in the range of 4 to 8 seconds. If you need to use other values, this time can
set more or less recommended values, but not less than 2 seconds.
| Note |
|---|
When setting the minimum delay time, the trimmer (resistor) should not be left in the far left position. In this position, the movable contact of the resistor may be in an unstable state, which can lead to improper operation of the lock. To avoid this, after setting the minimum time, slightly turn the trimmer to the right by a few degrees. This will ensure stable operation of the lock and guarantee its correct functioning. |
The use of electromechanical locks
...