You can open basic settings from a panel or a web interface. To enter the system settings, you must press the headset button twice (the inscription Admin will appear on the screen). Then enter the admin password (the default password is 123456) and press headset to confirm. This will open the settings menu.
Use the Up/Down arrows or the 2/8 buttons on your keypad to move between menus and fields. To confirm press the headsetbutton, and X if you need to go back.
...
Device Settings
...
For correct functioning, the panel and the monitor must have the same building and unit number in apartment settings. Also for monitors, you must indicate corresponding information about the floor, apartment, and device number.
If you have more than 1 entrance panel with the same logical address, you need to specify their device numbers, starting from 1 for the main device, and from 2 to 9 for others.
settings password for accessing the panel interface (GUI). This password is separate from the web interface admin password to enter device settings and web interface; and can be disabled if needed;
level of panel speaker volume;
panel camera stream resolution (640х480/1280х720/1920x1080 (optional)).
...