| Table of Contents |
|---|
...
Using the automatic setting of time, data will be automatically synchronized with a server via the Internet. Therefore, this option requires an Internet connection. To configure server work, complete the steps:
Tick the Set time automatically box.
Enter the URL or IP address of the server that is used for synchronization.
Choose the required timezone.
Submit changes.
...
If you need to get the current state of the MQTT client, go to System > Debug Support.
...
| Info |
|---|
For correct functioning, the MQTT protocol is required settings from the management system side. See for details. |
...
If necessary, you can activate sending real-time logs and heartbeat (current status: online/offline) from the panel to the server.
...
Device initialization
You can prepare some configurations on the Link server and apply them to the device. Step-by-step initialization guide you can find here.