...
Go to the Devices tab of the Device management section.
Click the plus icon in the left low corner.
Enter the device name.
Select its type: panel, monitor, access controller, elevator controller, IP camera (for Hikvision cameras), barrier (for AxxonOne integration).
Select the device model.
Indicate the device Serial number (check the Dashboard tab of the device web interface or device box). If you are adding an IP camera, enter any number in this field.
Select a group/subgroup where the device is installed.
If necessary, set location geodata for panels. This data is required for the Link app, when a visitor with a pass (added to Apple Wallet) approaches the available panel (with location), the pass will be automatically shown.
Add a description, if necessary.
Allow remote lock opening (from the device web interface, via API), if necessary.
Enter network settings for server and panel device interaction:
select the appropriate communication protocol: HTTP or MQTT (is recommended to use);
enter the device IP address and port (for HTTP only);
enter login and password that are used to enter the device web interface;
indicate server interaction password (is created in the Management system section (Network tab) of the device web interface).
...
select the ID of the alarm output relay on the camera that must be activated when the license plate is recognized (available for IP cameras).
set a timeout for the relay activity (available for IP cameras).
mark that the panel that is used with an additional camera for license plate recognition (available required only for panels with connected Axis cameras).
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
For details about the usage of license plates as identifiers, see How to configure license plate recognition. |
...