...
You must enter the concierge device number in the system. If you have 1 concierge monitor enter 0 1 for the device number. If you have more then the numbering must start with 0 1 and end with 8.
...
SIP Settings
| Widget Connector | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
These settings are required for the correct work of calls via SIP protocol. If you use the BAS-IP Link server we recommend configuring SIP settings remotely using the Link (via MQTT protocol) and then sending them to the device.
Step-by-step guide on how to get SIP nubmers and configure a monitor for SIP calls if you use BAS-IP SIP server you can find here.
To configure SIP calls for the panel, you must enable device SIP registration and enter the following parameters:
...
maximum talk timeout;
user SIP number;
SIP user ID (optional);
password for the SIP number.
You can enable/disable SIP early media. If the connection with the SIP server is lost, it will be automatically renewrenewed. You can set the re-registration interval (from 30-900 seconds) between attempts to renew the connection.
...
DTMF
| Widget Connector | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
In the menu, you can change the DTMF code, entering which the lock will be opened. Code length is up to 4 characters.
In the section, you can configure:
lock #1 name that is displayed during a call;
enabling/disabling opening the lock before answering a call when pressing the unlock button (works via internal protocol);
set DTMF code for lock #1 (if default value is disabled).
...