You can open basic settings from a panel or a web interface. To enter the system settings, you must press the # button twice (the inscription Admin will appear on the screen). Then enter the admin password (the default password is 123456) and press # to confirm. This will open the settings menu.
Use the Up/Down arrows or the 2/8 buttons on your keypad to move between menus and fields. To confirm press the # button, and * if you need to go back.
In this menu, you can set:
lock open timeout is a period (1-300 sec) during which relay contacts will be closed or open (depending on the lock type), and a lock will stay open;
lock open delay is a period (1-300 sec) after which relay contacts will close or open after sending a signal to open a lock;
floor number (Elev Refer) where the panel is installed for further lift control module EVRC-IP use (optional).
password (no more than 8 characters) is a general code entered on a panel keypad to open a lock. The default password is 0000.
