An entrance panel is configured remotely through the web interface by connecting to the device via an internet browser on the PC. The panel and PC from which you plan to access the device must be connected to the same network segment.
In the Internet browser, you must enter the panel IP address into the address input line. To find the device and figure out its IP address you can use this search and upgrade tool that shows all connected to the network devices.
After entering an IP address in the browser, a window to type a login and password will appear. At the top right corner, you can change the interface language. English, Ukrainian, Spanish, Polish, Russian, French and Dutch languages are available.
Also, you can find a device model name at the left lower corner and the current firmware version at the right lower corner.
Default values to enter the web interface:
Login: admin
Password: 123456
The password for logging into the web interface is the administrator password. By default, it is 123456, but you can change it in the appropriate tab.
If you enter the wrong password more than 5 times, your IP address will be banned. The time of the ban increases with each incorrect password input (60, 180, 600, 1800, 3600 seconds, etc. ). After the ban time is over, the IP will be automatically unbanned.
After unbanning, the number of incorrect attempts is not cleared, and the next incorrect authorization will result in the blocking of your address again with an increased ban time.
Here you can find a video of logging into the web interface: