Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Current »

After verifying whether a device is complete, you can switch to the connection step.

For connection you will need:

  • an Ethernet UTP CAT5 or higher cable connected to a network switch/router;

The maximum length of the UTP CAT5 cable segment should not exceed 100 meters, according to the IEEE 802.3 standard.

  • power supply at + 12V, 2 Amps; 

  • wires must be brought for connecting the lock and additional modules (optional). 

You can connect any type of electromechanical or electromagnetic lock for which the switched current does not exceed 5 Amps.

The following are typical connection schemes of all elements to the entrance panel:

Connection using an external power supply and an electromagnetic lock 

AV-08FB

image-20241104-123027.pngimage-20241104-123049.png

AV-08FBL

image-20241104-123234.pngimage-20241104-123325.png

Connection using an external power supply and an electromechanical lock 

AV-08FB

image-20241104-123407.pngimage-20241104-123426.png

AV-08FBL

image-20241104-123508.pngimage-20241104-123539.png

  • No labels