Advanced settings

In the menu, you can configure the concierge call number, a ringtone, and standby mode, set the screensaver, theme, etc.

Concierge call

Here you can set the number of concierge, or any other device for its quick call via SIP or P2P. The button for the call is in the navigation bar of the monitor main screen.

You can also enter the number in the device web interface. 

Call ringtone

Here you select a ringtone for an incoming call.

You can select a ringtone from the list of standard ones or from the monitor file system or SD card.

Theme 

In this section, you can select a theme that is displayed behind all the icons on the monitor screen.

There are 2 options:

• default theme; 
• custom theme: you can select an image from the list of standard ones or from the monitor file system or SD card.

If you set the custom theme, you can also select the color for the weather widget, clock, and date for their better display depending on the installed theme.

Standby mode 

By setting the timeout in the section, you specify after what time the monitor will turn this mode on.

You can configure various screensavers for standby mode as described further.

Announcement  

When setting the standby mode, you can enable/disable the display of announcements or ads in the mode. For the feature to work, you must:

1. Enable an announcement display.
2. Enter a link to the announcement (it can be either an RTSP stream or a web page).
3. Set a timeout (period of time) for displaying.
4. Save settings.

Screensaver 

In addition to an announcement, you can set other screensavers (clock, photo frame, IP cameras) for standby mode: 

1. Enable the screensaver for standby mode.
   

2. Select the desired type and enter the required data. 
3. Save settings. 

Service references 

In this menu, you can enter links that will be opened by pressing the corresponding buttons in the Services menu.

Weather 

The monitor supports several different widgets. One of them is the weather widget, the setting of which consists of:

• wind speed units indication: km/h or m/h;
• temperature units indication: °C or °F;
• enabling/disabling automatic city detection by IP address (if you have access to the Internet) for the weather display;
• entering the city for the weather display.

Custom widget

In addition to the weather widget, the monitor supports third-party application widgets that you can choose in this section. To display the selected widgets on the main screen, you must:

1. Enable the custom widget feature.
2. Press From the list button and select the desired widget from the available.

To turn off the widget display, enable the feature in the Custom widget section.

Firmware updates 

The firmware update can be done both automatically and manually. In the section, you can:

• enable/disable notifications about new updates (updates are checked once a day);
• enable/disable the use of a custom update server and specify its IP address or domain (used in closed intercom networks);
• сheck for updates and install them.

To update firmware automatically, press сheck for software updates, and if it is released, press Update Firmware. The process will take some time and in the end, the monitor will reboot several times.

You also can enable and enter a custom server URL (used in closed intercom networks) for firmware updates.

Also, you can update firmware via the web interface and SD card. 

How to install an update from an SD card

1. Download the required firmware from the webpage to one of the folders on the SD card.
2. On the page for updates checking, press the 3 dots in the upper right corner.
   
3. Press Install from the SD card.
   
4. Select the previously downloaded file and click OK.

The process will take some time and in the end, the monitor will reboot several times.