This tab contains a log that displays all the events that happened with added to the Link devices (panels, monitors, elevator controllers): login to the web interface, lock opening using an identifier, to or from which number a call was made, elevator called, etc. You can export all logs by clicking the corresponding button.
With the online mode, you can monitor all events in real time.
List of all events displayed in the log:
| Priority | Category | Event |
|---|---|---|
| Low | Information | Device Booted |
| System | SIP registration lost | |
| Medium | Access | Door was opened |
| Access | Door was closed | |
| Access | Lock was opened by free access button | |
| Access | Lock opened by exit button | |
| Access | Lock opened by identifier | |
| Access | General access code entered | |
| Access | Access granted by valid face identifier | |
| Access | Lift called to floor | |
| System | Login to the web interface | |
| System | Unsuccessful attempt to enter GUI settings | |
| System | Successfully logging into GUI settings | |
| Information | Incoming call | |
| Information | Outgoing call | |
| Information | Incoming call without status | |
| Information | Outgoing call without status | |
| Information | Outgoing call from web-interface | |
| Information | Missed call | |
| High | Access | Access denied by remote server |
| Access | Access granted by remote server | |
| Access | Wrong input code | |
| Access | Unknown identifier | |
| Access | Access denied by invalid face identifier | |
| Access | Unknown QR code | |
| Access | Access granted by the web interface | |
| Access | Access denied by the web interface | |
| Access | Lock opened by response device | |
| Access | Not valid identifier | |
| Access | Access granted by valid license plate | |
| Access | Access denied by not valid license plate | |
| Access | Access denied by unknown license plate | |
| Emergency | Tamper event | |
| Critical | Access | Lock opened too long |
| Access | Door is open too long | |
| Emergency | Abnormal event | |
| Emergency | Emergently event | |
| System | Firmware update |
Also, there is a filter by date (created at), category, priority, code, device, identifier, owner, or created marker. So, you can configure a flexible data display and quick search. To do this, you need to click the Add filter button and set the necessary parameters. For some searches, results can equal your search (so to be exactly as you indicate), or they can be less or great than your parameter, e.g. search less than indicated date will display all events before the date.
You can select a few parameters and choose whether the results will match all filters or any of them. In addition, you can save your search parameters for further use by clicking the corresponding button. All saved parameters are displayed after clicking the Segments button.
