Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

In this section, you can add an RTSP stream to view additional cameras and set up custom notifications.

RTSP Feed 

By entering RTSP streams (up to 4) in this section, you can view images from third-party IP cameras on a monitor during a call from an entrance panel. The feature is available for v4 monitors and other SIP devices with a keyboard.

  1. Generate an RTSP stream of the camera according to its manual.   

  2. Log in to the device web interface. By default, the username is admin and the password is 123456.
  3. Open the Advanced tab.
  4. Enter generated at 1st step URL at RTSP feed field. You can add up to 4 RTSP streams.
  5. Save settings by clicking Submit.

Custom notifications 

You can use both standard sounds and upload your own sounds for keys pressing, ring back, door unlocking, errors or door unlocking if the external Wiegand controller is connected. 

How to set custom sound notification

  1. Log in to the device web interface. By default, the username is admin and the password is 123456.
  2. Open the Advanced tab and scroll to the Custom notifications section.
  3. Choose what event sound you want to change: Keys pressing, Ring back, Door unlock, Errors, External Wiegand controller (relevant parameter only if the panel is connected to the external controller via Wiegand. The sound is produced when the lock is opened by an identifier added to the external controller).

  4. Tick File and upload audio with .wav extension. If the File box is disabled, a standard sound will be used.

  5. Submit settings. 

  • No labels