1. Contact Axxon soft and get Intelect software with the required license (https://www.axxonsoft.com/).
2. Install client + server on your PC.
3. Run Intelect software.
4. After it's started, place your mouse cursor in the top right corner so you can see the software window.
5. Press the Run button to open the menu and select system settings.
6. Select the Hardware tab and chose hard drives for records and press Apply.
7. Right-click on LOCALHOST to open the menu, and select Create object and Video capture device.
8. Set up parameters:
Where:
- Type: RTSP
- IP address: rtsp://admin:123456@192.168.88.161:8554/ch01
192.168.88.161 - IP address of your BAS-IP device - Port: 8554
- Name: admin
- Password: 123456
. Right-click on Video capture device to open the menu, and select Create object and Camera.
. Right-click on LOCALHOST to open the menu, and select Create object and Video capture device again with next parameters.
Where:
- Type: SIP
- IP addres of your BAS-IP device
- Port: 5060
. Right-click on Video capture device to open the menu, and select Create object and Sensor, it automaticaly fill parametes.
. Right-click on LOCALHOST to open the menu, and select Create object and Audio card.
. Type Name for the Audio card and press Apply.
. Selecr Board: IpCam RTSP
. Right-click on Audio card to open the menu, and select Create object and Microphone.
. Selecr Channel: IpCam RTSP
. Right-click on Audio card to open the menu, and select Create object and Microphone again, and set up parameters.
.
. In the same way as described in steps 10 - 14 create Audio card and Microphone for operator
. Right-click on LOCALHOST to open the menu, and select Create object and Intercom Subsystem.
