Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

You can open basic settings from a panel or a web interface. To enter the system settings, you must press the # button twice (the inscription "Admin" will appear on the screen). Then enter the admin password (the default password is 123456) and press # to confirm. This will open the settings menu.

Use the Up/Down arrows or the 2/8 buttons on your keypad to move between menus and fields. To confirm press the # button, and * if you need to go back.

Device Settings


In this menu, you can configure:

  • panel operation mode;
  • device language;
  • panel logical address (Building No., Unit No., and Device No.); 
  • admin password to enter device settings and web interface; 
  • level of panel speaker volume;
  • panel camera stream resolution (320x240/640х480/1280х720).

  • No labels