A device IP address is extremely important in BAS-IP infrastructure as with its help you can access the device web interface. To configure the device remotely (through the web interface), you must connect to it (enter its IP address) via the Internet browser on your PC. The device and PC from which you plan to access the device must be connected to the same network segment.
To find your device within the network and check its IP address you can with the help of the Remote Upgrade Tool software. Detailed installation guide you can find here.
After searching devices within the network, you will receive a list with results.
In the list, you can see device logical (ID), IP, and MAC addresses. To refresh the list, click Search.
Note:
By default, monitors can have the 192.168.1.89, 192.168.68.90 or 192.168.68.91 IP addresses.
The D series panels, AU-04L, and AU-04LA monitors have 192.168.1.90 or 192.168.1.91 addresses by default.
The AQ-07 or AK-10 monitors have the 192.168.1.90 or 192.168.1.91 address too.
Also, after a hard reset, some devices may have the 192.168.68.90 address.
If you are connecting multiple new devices out-of-the-box to your network, you are at risk of IP address conflicts. If you have 2 identical IP address in the networt, you can not access the web interface. So, we recommend that you connect devices to the network one by one and change the default IP address in the Network settings tab.
So, in such a way, you can find the necessary device IP address. Then in the Internet browser, enter the device IP address into the address input line and you will get access to the web interface.
Default values to enter the web interface:
Login: admin
Password: 123456
The password for logging into the web interface is the administrator password. By default, it is 123456, but you can change it in the appropriate tab.
For AV-07T or AV-07B panels, you must use AV-07 Device manager. Click Scan for the devices search. When the panels are connected for the first, they need to get an IP address via DHCP. So, you need to connect them to the router, which DHCP server option, and then you can set a static IP address.
ㅤDefault values to enter AV-07T or AV-07B web interface:
Login: admin
Password: admin
After the address setting, enter the device IP address into the address input line of the Internet browser and you will get access to the web interface.