Electrical connection
After verifying whether a device is complete, you can switch to the connection step.
For connection you will need:
an Ethernet UTP CAT5 or higher cable connected to a network switch/router;
The maximum length of the UTP CAT5 cable segment should not exceed 100 meters, according to the IEEE 802.3 standard.
power supply at + 12V, 2 Amps;Â
wires must be brought for connecting the lock and additional modules (optional).Â
You can connect any type of electromechanical or electromagnetic lock for which the switched current does not exceed 5 Amps.
The following are typical connection schemes of all elements to the entrance panel:
- 1 Connection using an external power supply and an electromagnetic lockÂ
- 2 Connection using an external power supply and an electromechanical lock
- 3 Connection using an uninterruptible power supply unit and an electromagnetic lock
- 4 Connection using an uninterruptible power supply unit and an electromechanical lock